Aqua Color
From 36.00€ Tax incl.
Instructions for Use
1 - Preparation
Adjust the chlorine: a few hours before the animation, check the chlorine level: The product will last a few hours if the PH is between 6.9 and 7.7 and chlorine between 0.4 and 1.4; and up to 7 days in the absence of chlorine.
If necessary, use Aqua Premio or any other equivalent product to remove chlorine.
2 - Pour the product
15 to 20 minutes before you want the effect to appear, pour the product into the storage tank or skimmers, with the filtration pump ON.
During animation, you can extend the color by adding water dye.
3 - Be patient
Wait for the dilution to end before swimming (a few minutes).
4 - Stop the product
At the end of the event, you can return to uncoloured water using a chlorine shock treatment.
POOL
FOUNTAIN
SPA
POOL
COLORING THE WATER
Applicable for all colours 
Number of uses with 1 litre (depth x width x length in metres)
• 1-1.5 x 10 x 5 - 5 uses
• 0.5-1 x 8 x 4 - 10 uses
• 0.2-0.5 x 4 x 4 - 20 uses
*May vary depending on the volume of the storage tank and the colour of the coating
FOUNTAIN
COLORING THE WATER
Applicable for all colours 
Quantity of water treated with 1 Litre
*May vary depending on the volume of the storage tank and the colour of the coating
SPA
COLORING THE WATER
Applicable for all colours 
Quantity of water treated with 1 Litre* : approx. 30 m³
*May vary depending on the volume of the storage tank and the colour of the coating
★★★★★ 5/5
"I use this dye for my pool and I'm thrilled with it. "
Christine
★★★★★ 4.5/5
"I highly recommend. The product is quick and easy to use. "
Marc
★★★★★ 4/5
"I wanted to try this product and I am not disappointed. "
Marie
★★★★★ 5/5
"The color of the product is superb and it gives a very nice effect to my pool. "
David
★★★★★ 4.5/5
"I received my product quickly. Good quality water colorant, I recommend."
Mélanie
★★★★★ 5/5
"This water colorant is just great. I am very pleased with this product! The color is natural and gives a touch of life. "
Stephane
